Clasps - gold-plated

2 sets, Toggle clasp, gold-plated steel, Ring inner diameter 10 mm, outer diameter 14 mm, loop inner diameter 3mm, bar length: 20mm.

1 piece, circle clasp, gold-plated silver, length with closed loop at the back (cannot be opened) 9 mm, circle diameter 6 mm, inner eye diameter approx. 2.5 mm.

1 set, round magnetic clasp for necklaces and bracelets, gold plated sterling silver, length with eyes 15mm, width 8mm, inner hole size 2mm. Strong magnets with inner connectors which ensures that it can not slide apart.

1 piece, lobster clasp, jewellery clasp, gold-plated sterling silver, length 18 mm, width 9.5 mm, thickness 2.2 mm, inner eye diameter 1.2 mm.

1 set, toggle clasp, uneven, gold-plated sterling silver, bar length 23 mm, bar thickness 2 mm, inner eye diameter 2 mm, ring inner diameter 9 mm, outer 14 mm. with 925 hallmark

Hook clasp for jewellery with closed jumprings, sterling silver, length 12.5 mm, width 6 mm, wire thickness 1 mm, outer jumpring diameter 5 mm.

Hook clasp for jewellery with closed jumprings, gold-plated sterling silver, length 12.5 mm, width 6 mm, wire thickness 1 mm, outer jumpring diameter 5 mm.

2 sets, Toggle clasp with jumpring, rose gold-plated steel, Ring inner diameter 10 mm, outer diameter 14 mm, loop inner diameter 3mm, bar length: 20 mm.

1 piece, Gold-plated sterling silver clip ring with eye. Allows you to clip jewellery pendants on and off a bracelet or necklace. Length 10.5 mm, width 8.5 mm, height 2.2 mm, inner hole diameter 5mm, inner eye diameter 1 mm, can grip up to 5 mm cord.

1 piece, S clasp with centre wreath ornamentation and two closed 6x1mm eyelets, gold-plated sterling silver, length 18 mm, width 11 mm, wire thickness 1.2 mm

1pc., chain closing with flat lobster claw clasp and cup ends, gilded sterling silver, total length 30mm., cup end diameter 2,6mm., inner tube end diameter 2mm.

1 piece, locking set for leather cords and similar, durable gold-plated steel. The end clamps are clamped around the ends of the cord with flat-nose pliers so that they overlap. Suitable for 3-4 mm cords.

1 piece, small lobster clasp, jewellery clasp, gold-plated sterling silver, length 7,8 mm, width 3,8 mm, thickness 2,2 mm.

Set of approx. 240 terminations in 7 sizes for woven bracelets, earrings and similar woven with seed beads up to size #8 or small round beads up to 3mm, lengths from 10 to 40mm, diameter 4mm, width with eye 5.5mm, in the colours gold-plated and platinum-coloured brass, supplied in plastic box.

2 sets, bit lock, gold-plated stainless steel, rod length 18 mm, rod eye inner diameter 3 mm, ring inner diameter 8 mm, outer diameter 12 mm.

Heavy duty spring ring clasp, gold-plated silver, with two 8-shaped eyelets, outer ring diameter 14 mm, ring thickness 3mm, total length with eyelets 23 mm, inner circle diameter 9 mm, inner eyelet diameter approx. 3 mm. 1 pc.

2 sets, Toggle clasp with jumpring, gold-plated steel, Ring inner diameter 12 mm, outer diameter 16 mm, loop inner diameter 3mm, bar length: 25 mm.

1 piece, box lock with pin, gold-plated sterling silver, length 16 mm, width 7 mm, height 5.5 mm. The lock is released and the pin is pulled out or inserted by pressing the spring-activated rear part. Elegant and simple clasp for necklaces and bracelets.

1pc., chain closing with flat lobster claw clasp and cup end, gilded sterling silver, total length 30mm., outer crimp end diameter 7mm., inner cup end diameter 6mm.

1pc., chain closing with flat lobster claw clasp and cup end, gilded sterling silver, total length 30mm., outer crimp end diameter 6mm., inner cup end diameter 5mm.

1 set, bite lock, large model, durable gold-plated brass, ring measures: L18xW14xH2, bar measures: L26xH7xW4 mm.

1 set, toggle clasp, durable gold-plated brass, ring measures: L12xW9xH1.5, rod measures: L12.5xH1.5 mm.

1 piece, Cylinder lock / slide lock for 2 bead strings necklaces, length 15 mm, tube diameter 6 mm, gold-plated Sterlingsilver, width with loops 10mm.

1 piece, Cylinder lock / slide lock for 3 bead strings, length 20 mm, thickness 6,5 mm, gold-plated stainless steel (nickel-free), inner hole diameter 1,6mm, very durable quality.

1 piece, Cylinder lock / slide lock for 2 bead strings, length 15 mm, thickness 6,5 mm, gold-plated stainless steel (nickel-free), very durable quality.

2 sets of gold plate brass, bit lock with loop, Ring: 14x11x2mm, loop: 2mm, bar length: 19x5.5x2mm, hole: 2mm

1 set, square and wavy toggle and bar lock, gold-plated sterling silver, bar length 25 mm, bar thickness 2 mm, bar inner eye diameter 1 mm, ring/square dimensions inner 11,5x6 mm, outer 17,5x10 mm. Ring/square inner eye diameter 1 mm, with 925 stamp

10 pcs, Lobster clasp, jewellery clasp, gold plated sterling silver, with 925-mark, length 11 mm, width 6 mm, thickness 3,5 mm.

10 pcs, Lobster clasp, jewellery clasp, gold plated sterling silver, with 925-mark, length 9 mm, width 5 mm, thickness 3 mm.

10pcs., spring ring clasp, gilded sterling silver, length with eye 8.5mm., ring diameter 5.5mm., inner eye diameter approx. 1,5mm.

2pcs., spring ring clasp, gilded sterling silver, length with eye 8.5mm., ring diameter 5.5mm., inner eye diameter approx. 1,5mm.

100pcs., lobster claw clasp, gilded steel, durable gilding, length 12mm., width 6mm.

100pcs., lobster claw clasp, gilded steel, durable gilding, length 10mm., width 5mm.

4 sets, screw clasps for jewellery, necklaces and the like, gilded brass, total length 14 mm, width 3 mm, inner loop diameter 2 mm.

1pc., springring clasp, gilded silver with eye which can open, height 10mm, total length with eye 14 mm., inner clasp diameter 5,5mm., inner eye diameter approx. 2,5mm.

4pcs., lobster claw clasp, gilded stainless steel, durable gilding, length 12mm., width 6mm.

1 piece, Spring ring clasp with loosely hanging jumprings, gilded steel, very durable gilding, diameter 15 mm, thickness 2.5 mm, inner eye diameter 3 mm.

1 piece. jewelry clasp and findings mix in plastic box, gold plated brass. Head /Eye Pins, Folding Crimp Ends, Bead Tips Knot Covers/Ribbon Ends/Twist Chain Extensions, Alloy Lobster Claw Clasps, Brass Chains and Earring Hooks. 
Please note, as this is a low-cost product, we do not recommend these materials for resale, as the durability of the gold plating is limited.

For long wear resistance, it is recommended to apply jewellery lacquer before use.

Sizes:
Clasp: 10~12x6~7mm
Ribbon end: 8x8x5mm, hole: 2mm, 15pcs
Earring hook: 19mm long, hole: 1.5mm, 20pcs
Tip knot: 8x4mm, hole: 1.5mm, 30pcs
Bead cap: 6x1mm, hole: 1mm, 2g
Crimp end: 6x3mm, 2g
Drop: 6x3mm
Jump Ring: 4x0.7mm, 2.6mm inner diameter, 10g
Jump Ring: 6x0.7mm, 4.6mm inner diameter, 10g
Pin: 22x0.7mm, 10g
Chain extension: 50x3.5mm, 20strands
Ball Chain: 1x100cm
Twist Chain: 3m long, link: 2.5x1mm.

2pcs., springring clasp, durable gilded stainless steel, length with eye 7mm., ring diameter 5mm., inner eye diameter approx. 1.5mm.

100pcs., lobster claw clasp, gilded stainless steel, durable gilding, length 9mm., width 5mm.

4pcs., lobster claw clasp, gilded stainless steel, durable gilding, length 12mm., width 6mm.

4pcs., lobster claw clasp, gilded stainless steel, durable gilding, length 10mm., width 5mm.

1pc., spring ring clasp, gilded sterling silver, length with eye 8.5mm., ring diameter 5.5mm., inner eye diameter approx. 1.5mm.

1 set., toggle clasp, gold plated sterling silver, bar length 15mm, bar eye diameter inner 2mm, ring diameter: inner 6mm, outer 8mm. with 925-stamp

1 set., toggle clasp, gold plated sterling silver, bar length 23mm, bar thickness 2mm, inner eye diameters 2mm, ring diameter: inner 8mm, outer 12mm. 925-stamped

4pcs., lobster claw clasp for jewelry, antique bronze colored brass, length 12mm.

4pcs., lobster claw clasp, antique bronze colored brass, length 10mm.

5 pieces. round slide-lock beads or stopper beads with rubber membrane, strong gilded brass, diameter 4 mm. flexible hole size 0.7mm, Hole is suitable for two 0.8 - 1 mm cords laid gold-filled, e.g. polyester cord. Serves as adjustable locking beads for, for example, bracelets. Cords are easily mounted by the use flexible wide-eye beading needles. The beads can also be used as a back fastening mechanism for earstuds or as spacers on ear chains.

5 pieces. round slide-lock beads or stopper beads with rubber membrane, strong gilded brass, diameter 4 mm. 0,7mm hole suitable for two 0.5 - 0.6 mm cords, e.g. polyester cord. Serves as adjustable locking beads or stopping bead for, for example, bracelets. Cords are easily mounted by the use flexible wide-eye beading needles. The beads can also be used as a back fastening mechanism for earstuds.

1pc., lobster claw clasp, gilded sterling silver, length 16mm, width 9mm.

1pc., lobster claw clasp, gilded sterling silver, length 13mm, width 7mm.

1pc., adjustable locking bead with rubber membrane, gilded Sterling silver, diameter 6mm, thickness 4mm. Suits the chains AR25 and AR30. and for single wire or cord with a thickness of 1.2 - 1.5 mm.

1pc., high quality magnetic clasp, gold plated with clear zirconia and strong magnet, length 13mm, diameter 8mm, eye diameter 1.7mm.

Ca. 70pcs., lobster claw clasps, 5-size mix in round box, with 1x6mm jumprings, gold plated brass, clasp length 10mm to 21mm. 

NOTE, relatively weak gilding. We recommend pre-treatment with jewelry lacquer or other clear lacquer for longer life.

Ca. 220pcs., lobster claw clasp. 6-color mix in round box, base material brass, clasp length 10mm, width 5mm.

2pcs., adjustable locking bead with rubber, gilded Sterling silver, diameter 4mm, for 0.5mm cord gold-filled or 0.8mm single cord. The locking bead can be adjusted to fit your wrist or ankle. Use a beading needle and a set of pliers to add the bead.

1 set, gilded Sterling silver, round magnetic clasp, length with eyes 16mm, width 10mm, inner hole size 2mm. Strong magnets with inner connectors which ensures that it can not slide apart.

1pc., lobster claw clasp, gold-plated sterling silver, length 12mm, width 5mm.

2pcs., adjustable locking bead with a 3mm eyelet and rubber, gilded sterling silver, diameter 4mm, for 0.9mm cord. The locking bead can be adjusted to fit your wrist or ankle. Use a beading needle and a set of pliers to add the bead.

2pcs., adjustable locking bead with rubber, gilded Sterling silver, diameter 4mm, for 0.5mm cord. The locking bead can be adjusted to fit your wrist or ankle. Use a beading needle and a set of pliers to add the bead.

2pc., gilded clasp set for leather cord etc., gilded brass. Total length 34mm, clasp measurements 12x7mm. The cord ends can be pressed tight around the cord. Fits 1.5 to 2mm cord.

2pcs., quality gilded steel locking heads for special ball shaped jewelry clasps with hinge. length 4mm, width 3mm.

2pcs., quality gilded sterling silver, special locking heads for ball clasps. length 5mm., width 4.5mm.

1pc., springring clasp with loose jumprings, length 25mm., diameter 20mm., thickness 5mm., inner eye diameter 4mm. Limited wear resistance with gold plating; we recommend using jewellery varnish before use.

1pc., springring clasp with loose jumprings, length 20mm., diameter 15mm., thickness 4mm., inner eye diameter 3mm. Limited wear resistance on gilding, we recommend jewellery lacquer before use.

4pcs., lobster claw clasp, gilded stainless steel, durable color, length 9mm., width 5mm.

1pc., cord ends for necklace or bracelets, flat lobster claw clasp and glue-in cups, gilded sterling silver, total length 25mm., outer cup diameter 2,6mm., inner cup diameter 2mm. With 925 stamp engraved. Should be mounted with super glue.

1pc., cord end for necklace or bracelet, with flat lobster claw clasp and cup ends, gilded sterling silver, total length 35mm., outer cup diameter 1,5mm., inner cup diameter 1mm.

1pc., cord ends for necklace or bracelets, flat lobster claw clasp and glue-in cups, gilded sterling silver, total length 25mm., outer cup diameter 3,5mm., inner cup diameter 3mm. With 925 stamp engraved. Should be mounted with super glue.

1pc., cord ends for necklace or bracelets, flat lobster claw clasp and glue-in cups, gilded sterling silver, total length 26mm., outer cup diameter 3mm., inner cup diameter 2,5mm. With 925 stamp engraved. Should be mounted with super glue.

1pc., chain closing with flat lobster claw clasp and cup ends, gilded sterling silver, total length 30mm., cup end diameter 2mm., inner crimp end diameter 1,5mm.

1pc., chain closing with flat lobster claw clasp and crimp end, gilded sterling silver, total length 30mm., outer crimp end diameter 5mm., inner crimp end diameter 4mm.

2pcs., S-hook clasp, gilded sterling silver, wire thickness 1mm, length 11mm., width 7mm.

1 piece, Lobster clasp, jewellery clasp, gold-plated sterling silver, length 9 mm, width 5 mm, thickness 3 mm.

1pc., lobster claw clasp, for jewelry and necklaces, gilded sterling silver, length 11mm.

1pc., gilded sterling silver, clasp, hook-style, square, outer width 9,5mm, outer thickness/height 5mm, total length 19,5mm. Glue-in end: inner width 8mm, inner height 3mm, depth 8mm. Weight 3 gram. Click on image for example. The loop is closed with oval ribbon rings, which can be found in the menu "Jumprings".